Last Updated: September 2026 | Reading time: about 9 minutes
Almost every guide to this unit starts with the finish. That is the wrong end. A built-in entrance shoe cabinet in Bengaluru, at the common size of 900 mm wide and 1,200 mm high, costs Rs 14,000 to Rs 42,000 delivered in 2026, and what moves it across that range is depth, not laminate against acrylic. A 200 mm tilt-out lands near Rs 14,000 to Rs 18,000. The same face at 500 mm deep, built that way only to fit a branded pull-out, lands at Rs 26,000 to Rs 42,000.
On this page
What an Entrance Shoe Cabinet Costs in Bengaluru, Pair by Pair
Take the size that fits most Bengaluru flats: 900 mm wide and 1,200 mm high, against the wall beside the main door. That is 12 square feet of face area.
We price built-in joinery per square foot of shutter area. Our published Bengaluru rate card for 2026 puts a site carpenter at Rs 1,050 to Rs 1,250 per square foot and a factory modular unit at Rs 1,300 to Rs 1,450. On 12 square feet that is Rs 12,600 to Rs 15,000 on site and Rs 15,600 to Rs 17,400 factory made.
Here is where this unit stops behaving like the rest of your joinery. Shutter-area pricing assumes a fixed carcass depth behind the face. A wardrobe is 600 mm deep everywhere in Bengaluru, so the rate holds. A shoe cabinet is 200 mm to 500 mm deep, and the board behind the face scales with depth while the face does not.
Count the board on that unit with four internal shelves. At 200 mm deep the carcass takes 28.4 square feet of 18 mm board, at 350 mm 41.0 square feet, at 500 mm 53.6 square feet. That is 88 percent more board for an identical face, or Rs 2,300 to Rs 4,000 more in sheet material at Rs 90 to Rs 160 per square foot.
A pair of adult shoes side by side takes about 200 mm of shelf width, so a 900 mm shelf holds 4 pairs and four shelves hold 16 pairs. Pepperfry sells a ready-made 16 pair cabinet at Rs 11,999. Our Essential built-in tier stores the same 16 pairs for Rs 14,000 to Rs 18,000, and that premium buys a flush fit and no dust gap underneath.
In eight years of Bengaluru apartments nobody has raised the entrance unit at a first meeting. It surfaces in week six, once the kitchen and wardrobes are locked and the client notices the shoes are still on the floor.
One first-hand detail decides more of this than any price list. On our own published allocation sheet for a Bellandur 2BHK, the line reads Living and Dining (TV unit, dining unit, foyer), 14 to 18 percent of the project, Rs 1,40,000 to Rs 2,30,000 in the essential tier and Rs 2,50,000 to Rs 4,00,000 in the premium tier. The foyer sits inside that line with no figure of its own, on a sheet we publish ourselves. That is why it is decided last and cut first.
- Entrance shoe cabinet
- A built-in unit fixed to the entry wall, sized to hold outdoor footwear within reach of the main door. In Bengaluru in 2026 a 900 mm wide and 1,200 mm high unit costs Rs 14,000 to Rs 42,000 delivered, depending almost entirely on whether it is 200 mm, 350 mm or 500 mm deep.
- A 900 mm by 1,200 mm built-in entrance shoe cabinet costs Rs 14,000 to Rs 42,000 in Bengaluru in 2026.
- 200 mm to 500 mm deep adds 88 percent more carcass board for the same face.
- A Hafele pull-out shoe rack is 448 mm to 456 mm deep, forcing a 500 mm carcass.
- Pull-out mechanisms run Rs 2,800 to Rs 16,400, sometimes more than the carpentry.
- A flat shelf needs 350 mm of depth. A tilt-out needs only 150 mm to 200 mm.
- Four shelves at 900 mm wide hold 16 pairs, the same as a Rs 11,999 retail cabinet.
Free Material Sample Kit
Ply, laminate, hardware, veneer, real samples couriered.
WhatsApp Us Call +91 94499 00222Why 200 mm Versus 500 mm Changes the Bill More Than the Finish
Every competing page opens with laminate against acrylic against veneer. On a 12 square foot face that choice is worth a few thousand rupees. Moving from 200 mm to 500 mm deep is worth several times more, and nobody presents it as a choice.
Depth is not chosen by you. It is chosen by the fitting. A shoe lying flat is about 300 mm long, which is why the trade settles on 35 cm of internal depth for a flat shelf. A tilt-out stands the shoe on edge and needs only 15 cm to 20 cm. A branded pull-out is deeper than both: Hafele India publishes its pull-out shoe racks at 456 mm and 448 mm. Add a back and a shutter and you are building a 500 mm carcass.
| Internal depth | What it takes | Board on a 900 x 1,200 face | Mechanism cost | Delivered cost 2026 |
|---|---|---|---|---|
| 150 mm to 200 mm | Shoes on edge, tilt-out front | 28.4 sq ft | Rs 600 to Rs 2,000 | Rs 14,000 to Rs 18,000 |
| 350 mm | Shoes lying flat on a shelf | 41.0 sq ft | Nil, plain shelves and hinges | Rs 18,000 to Rs 24,000 |
| 500 mm | Branded pull-out mechanism | 53.6 sq ft | Rs 2,800 to Rs 16,400 | Rs 26,000 to Rs 42,000 |
Board areas are arithmetic from the stated dimensions for two sides, top, bottom, back and four shelves, not a measured project.
Tilt-Out, Flat Shelf or Branded Pull-Out: What Each Holds and Costs
The mechanism prices are public and the spread decides the tier on its own. A Hettich vertical pull-out shoe rack lists at Rs 4,547, a stainless steel Hettich horizontal pull-out at Rs 6,100 per piece in Bengaluru, and a Hafele pull-out at an MRP of Rs 16,400. Across brands, pull-out units run roughly Rs 2,800 to Rs 5,200 for Ebco, Rs 4,200 to Rs 7,500 for Hettich and Rs 5,400 to Rs 10,000 for Hafele.
Set that against the carpentry. On our 12 square foot unit factory modular work tops out at Rs 17,400, so a single Hafele mechanism at Rs 16,400 very nearly doubles the cost of the cabinet. That appears on no page currently ranking for this question.
| Tier | Specification | Depth | Pairs held | Delivered cost 2026 |
|---|---|---|---|---|
| Essential | Tilt-out front, BWR ply carcass, laminate, site built | 200 mm | 12 to 16 | Rs 14,000 to Rs 18,000 |
| Comfort | Flat adjustable shelves, factory modular, soft-close hinges | 350 mm | 16 to 20 | Rs 18,000 to Rs 24,000 |
| Signature | Branded pull-out, acrylic or veneer, seat top | 500 mm | 12 to 18 | Rs 26,000 to Rs 42,000 |
Read the pairs column before the price column. Signature costs the most and holds no more than Comfort, because the pull-out frame takes volume that shelves do not. You are buying the glide and the seat, not storage.
On material, at 18 mm in 2026 plywood runs about Rs 90 to Rs 160 per square foot against Rs 55 to Rs 85 for MDF, so on 41 square feet the whole plywood premium is roughly Rs 1,400 to Rs 3,100. Pay it. This unit sits where the floor is mopped daily and the bottom 100 mm is what fails.
Get a Line-Item BOQ
Every hinge, plywood sheet, and hardware price, fully transparent.
WhatsApp Us Call +91 94499 00222The 1,200 mm Entry Strip and What a Deep Cabinet Takes Out of It
This next part is specific to how Bengaluru apartments are built, and it is why the retail answer does not work here. Most 2BHK and 3BHK flats handed over in this city in the last fifteen years have no foyer. The main door opens straight into the living room, and what you have is a strip of floor before the sofa begins. In the plans we measure, that strip is commonly about 1,200 mm.
The National Building Code of India 2016 is the useful reference here, not because it governs furniture but because it says what a passage needs to be. Its accessibility provisions set a minimum clear door width of 900 mm and a minimum passage width of 1,200 mm. Now subtract a cabinet:
- A 200 mm tilt-out leaves 1,000 mm of walkway.
- A 350 mm shelf unit leaves 850 mm.
- A 500 mm carcass built to house a Hafele pull-out leaves 700 mm.
That last figure is narrower than the door you just walked through. It is the width at which an adult carrying a grocery bag turns sideways, and at which an inward-swinging flat door fouls the open shutter beside it. We have been called to correct exactly this twice.
So the sequence runs the other way. Measure the strip, subtract the 900 mm of walkway you want to keep, and what is left is your maximum depth. Where the strip is tight, go long and low: a 1,800 mm unit at 300 mm deep holds more pairs than a 900 mm unit at 500 mm, and doubles as a bench.
Get a Free Layout Sketch
Send your floor plan; we return a custom layout in 3 working days.
WhatsApp Us Call +91 94499 00222Why the Foyer Unit Carries No Line of Its Own on a Bengaluru Quote
Go back to that Bellandur sheet. Living and dining, covering the TV unit, the dining unit and the foyer together, is 14 to 18 percent of the project, and in our Marathahalli breakdown the TV unit and crockery unit alone take 8 to 10 percent. The entrance unit has nowhere to sit, and that costs money three ways.
It is priced by subtraction. Once the TV unit has eaten most of the living and dining allocation, the entrance unit gets what survives, usually Rs 12,000 to Rs 15,000, which is why so many arrive as a 200 mm box with no seat.
It is the first thing cut when the total runs over. Nobody deletes a wardrobe. Everybody deletes the thing with no line number.
And it is drawn too late to coordinate with the electrical. The entry wall is where the main switchboard, the video door phone and often the distribution board live. Draw the unit in week six and one of them will be exactly where the cabinet wants to go, and moving it after plastering means chasing and repainting.
The fix costs nothing. Ask for the entrance unit as its own line on the bill of quantities, with width, height and internal depth on it. A designer who will not give it a line has not designed it.
See Real Bengaluru Projects Near You
Visit our finished projects, feel the hardware, verify the finish.
WhatsApp Us Call +91 94499 00222Frequently Asked Questions About Entrance Shoe Cabinet Cost
What is the ideal depth for a shoe cabinet in a Bengaluru flat?
A flat shelf needs 350 mm, because an adult shoe lying flat is about 300 mm long. A tilt-out front needs only 150 mm to 200 mm. Measure your entry strip, keep 900 mm of walkway, and take the remainder. On a 1,200 mm strip that is 300 mm.
Is a built-in shoe cabinet worth it over a ready-made one?
A ready-made 16 pair cabinet is about Rs 11,999, and Bengaluru retail racks run Rs 2,000 to Rs 20,000. A built-in of the same capacity is Rs 14,000 to Rs 18,000. That premium buys an exact fit, no dust gap underneath and a matching finish.
How much does a pull-out shoe rack fitting cost in India?
In 2026, roughly Rs 2,800 to Rs 5,200 for Ebco, Rs 4,200 to Rs 7,500 for Hettich and Rs 5,400 to Rs 10,000 for Hafele. A Hettich vertical pull-out lists at Rs 4,547 and a Hafele pull-out at an MRP of Rs 16,400. These fittings are 448 mm to 456 mm deep, so the mechanism price is only half of what you are accepting.
How many pairs will a 900 mm wide shoe cabinet hold?
About 4 pairs per shelf, since a pair side by side takes roughly 200 mm of width, so four shelves hold about 16 pairs. A tilt-out of the same face holds 12 to 16, and a branded pull-out slightly fewer because the frame takes internal volume.
Should an entrance shoe cabinet be plywood or MDF?
Plywood, in a water-resistant grade at the plinth. At 18 mm in 2026 plywood is Rs 90 to Rs 160 per square foot against Rs 55 to Rs 85 for MDF, so on 41 square feet the premium is about Rs 1,400 to Rs 3,100. The bottom 100 mm always swells first.
Visit Our Vignan Nagar Studio
See real samples, hardware, and finished-project photos at our office.
WhatsApp Us Call +91 94499 00222Limitations, Sources and Final Word
Limitations. The board areas and totals here are arithmetic from the stated dimensions and our own published Bengaluru rate cards, not one measured project, because no myNivasa client has yet commissioned an entrance unit on its own. Mechanism prices are listed retail prices captured in September 2026, and the 1,200 mm entry strip is what we see most often, not a code requirement.
Sources: Hafele India specifications for pull-out depths of 448 mm and 456 mm, Dimensions.com shelf depth data for the 12 inch footwear shelf, Studio Matrx on passage width under NBC 2016, and Hettich India wardrobe accessories. Retail benchmarks are publicly listed Pepperfry, Wooden Street and Nilkamal prices, September 2026.
Final word. This is the smallest built-in in a Bengaluru home and the most likely to be got wrong, because its price is set by a dimension nobody discusses. Decide the depth before the finish, and measure the walkway before the mechanism.
To apply these numbers to your own entry wall, we are at 2nd Floor, Sapthagiri Complex, 265/1, Kaggadasapura Main Rd, Vignan Nagar, Bengaluru, Karnataka 560075. Call or WhatsApp +91 94499 00222, or write to [email protected]. We work across Marathahalli, Whitefield, HSR Layout, Sarjapur Road, Indiranagar, Koramangala, JP Nagar, Bellandur, Hebbal, Yelahanka, Electronic City and Bommanahalli.
Also read: the Bellandur 2BHK allocation sheet where the foyer budget hides, site carpenter versus factory modular rates per square foot of shutter area, choosing BWR against BWP plywood in Bengaluru, and the lines that vanish from a Bengaluru joinery quotation.
Add a Comment